This listing is for the BNVD Single gain control with White Phosphor Elbit systems tubes.
The NVD-BNVD-SG Binocular is a dual tube goggle with gain control. The BNVD-SG operates with a single gain control knob that controls both eyepieces simultaneously. Depending upon the amount of ambient light, the user can adjust the tube brightness (gain) lower to compensate for overly bright conditions or to increase the gain under extreme dark conditions. The BNVD-SG can be used as a monocular by choosing which side you want to use as your night vision eye and rotate the other side/arm of the binocular up and out of the way. This enhanced capability allows the user to rotate either monocular channel away from their eye while leaving the other monocular channel in place. This provides the operational flexibility to use the BNVD-SG as either a dual-eye or single-eye device. When used as a monocular, the user can operate the BNVD-SG with weapon mounted sighting equipment without sacrificing night-time situational awareness. Best of all with all the added features, the BNVD-SG is still substantially lighter than the AN/PVS-7 single tube goggle!
NVD-BNVD-SG now features a “Tactical Monocular Cutoff”, which turns off power to each channel of the binocular whenever a channel is rotated up out of the users’ line of sight. This eliminates stray light emitting from the monocular eyepiece, which would reveal the user to anyone else on the battlefield. The BNVD-SG has an automatic system power cutoff whenever the BNVD-SG is flipped up into the helmet mounted stow position, and then powers back on when it is flipped back down. This feature can also be turned off via a four position ON/OFF switch. The BNVD-SG is submersible to 66 feet (20 meters) for up to 3 hours. The BNVD-SG is available with an optional battery pack, which holds 3 “AA” Alkaline batteries for run times exceeding 50 hours.
The BNVD-SG can be used with optional 3X Afocal Magnifiers. Each 3X Magnifier can be either slide onto each objective lens or screw into the threads on the objective lenses. For extended use, it is recommended to screw them on to prevent the lenses from falling off. These magnifiers transform the BNVD-SG into a fixed 3X Magnification Binocular.
All tubes are Elbit Systems SLH grade tubes
This system complies with MIL-STD 810G, MIL-PRF-A3256342A(CR) and MIL-PREF-49427(CR).
Minimum specifications- Signal to noise ratio- 25 min, Photocathode Response 1800 minimum, EBI 2.5 max, Resolution 64LP minimum REMEMBER- these are just the minimums, YOUR unit will most likely ship with better numbers! Spot Spec- Zone 1- ZERO allowed, Zone 2- 2 allowed Zone 3- 1 .006-.009 2 .003-.006 This model is the 1900 FOM (minimum) model. Use the drop down menu to upgrade to 2200 FOM Minimum tubes- note that the spot spec remains the same whether 1900 or 2200 FOM
Use the drop down menu to upgrade to 2200 FOM minimum tubes- just put a "1" in the text field of the drop down menu or call to order.
JRH Enterprises and Night Vision Devices BNVD - SHOT Show 2020
Use BATTERY PACK option to add the optional battery pack housing and pack. This absolutely HAS to be ordered with the unit and cannot be added later however a single AA battery will run this unit upwards of 40 hours, so you may not feel the optional battery pack is even necessary, but if you ever think you will want that option, it absolutely has to be ordered with it. Call if you have any questions. $50. Shipping.
If you would like a Norotos Lo Sto helmet mount for this system, use the drop down menu and put a "1" in the text field for Lo Sto mount.
If you would like a colored Housing in Flat Dark Earth use the options menu and put a "1" next to the color option you choose. If you do not choose a color the standard Black housing will be shipped. Pictures show a Flat Dark earth housing.
912.379.9441 or 912.375.1480
Since 1992 "A name you can trust."
Like most Night vision and all dual tube sets, these have a long lead time, and these are NOT "in stock" as in ready to ship out to you immediately. HIGH RECOMMEND THAT YOU CALL to order so we can go over lead times, etc. 912.379.9441 or 912.375.148
